31
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
The initiation of the biomass boiler
In case that the user wants the boiler to run on solid fuel, the following steps should be done:
If the boiler has never before run on pellets but is being used for the first time on solid fuel, it
is necessary to force a small number of pellets into the combustion chamber. This way, a so-
called false air through doser channels is prevented.
Through the lower door prepare a small amount of wood and ignite. Upon getting a stronger
flame, add fuel. For the purpose of less smoke, open the flap inside the boiler by pulling the
lever on the side of the boiler that is into the open position.
Pay attention to signal lights number 6 and 7. If light 6 is on, that means the boiler is in the
Pellets operation mode. Control button 4 should be held for more than 3 seconds. That turns
off Pellets mode. Right after, press control button 3 and hold more than 3 seconds. That initiates
Wood operation mode
After 20-30 minutes when the boiler is in normal operation mode, return the flap inside the
boiler into the operating mode by pulling the lever on the side towards the front door of the
boiler.
The combustion chamber mustn’t be covered with ash dumps etc. because the necessary air for
combusting wood or coal is provided through that space.
