Radicon J 100, Manual

Page: 7 / 76

3
SERIES J
Series J Shaft Mounted Speed Reducers are high quality products, submitted to intense quality control and
manufactured with the highest precision.
— Worldwide after sales service
— 19 types up to 600 kW, 57000 Nm
— Wide range of standard accessories
— High efficiency
— Long gear and bearing lifetime
— All mounting positions possible
— Easy to mount
— Easy to change speed through change of V-belt transmission
— Space saving
— Low noise level
— Easy to service, due to standard components
GENERAL DESCRIPTION
* Not standard for the smallest sizes of single and double reducers.
The shaft sleeve is supplied with
tapped holes for dismounting the
reducer as well as locking the
reducer to the shaft.*
The input shaft diameter corre-
sponds to IEC standard for motor
shafts, thus simplifying standardi-
zation of V-belt pulleys and
couplings. Locating shoulder
provided for pulleys and
couplings.
The input shaft is supplied with
tapped hole for fitting V-belt pulley
or locking washer for V-belt pulley.
All housing contact surfaces are
fine milled thus eliminating the
necessity for gaskets and
possible oil leaks.
KIBO ® - One of the most cost
efficient dismounting methods
that is available on the market,
patented by us is available as a
standard accessory to every
Series J shaft mounted speed
reducer.
Modern heat treatment of high quality
gives gear wheel and pinions the hard
wearing surface and tough core
necessary to handle harsh duties.
Manufacturing tolerances comply to
DIN and AGMA specifications. Helix
angle
and small modules give more teeth in
mesh for smooth and quiet running.
High quality bearings selected for long
service life.
Backstop options are available for all
double reduction units (For single
stage units on special request).
High quality close grained cast iron
housing with maximum rigidity and low
weight saves space.
Torque arm bracket will stand up
to tough reversible shock load
applications allowing for two torque
arms to be mounted in opposite
directions.
0201