Radicon J 100, Manual

Page: 23 / 76

19
SERIES J
DIMENSIONS - DOUBLE REDUCTION
J100 - 190 Double Reduction
Size Ratio A AC C
1
J K
L
M N P R T T1 T2 T3 S
2
U V W
Size Ratio X Y Z
F
6
H
7
G FA D
3,8
B
4
E HF
AK
kg
Shaft sleeve
5
Input shaft
Weight
max min
Please note: Dimensions R, T, T1, T2, T3 are not
machined, deviations can occur.
RP
Dimensions for threaded
holes at gearhouse sides,
see page 53.
0202
notes
1. The V-belt pulley should be placed as close to the housing
as possible.
2. These dimensions are minimum diameters of driven
pulley to prevent overloading of the bearings.
3. Tolerances according to ISO H7.
4. Tolerances according to ISO E9.
5. The reducer should normally be mounted on a shaft
with tolerance ISO js6. On heavy duty applications
closer tolerances are recommended.
6. Tolerances according to ISO m6.
7. Tolerances according to ISO h9.
8. Space for spacer if locking ring is used.
J100 15/20/25:1 286 10
171.5
31.5 99 180 755 500 30 30 100 170 83 116 182 215 224 436 211 238
J110 15/20/25:1 330 13 185 45 121 197 730 490 35 36 120 228 97 132 198 233 250 496 253 284
J125 15/20/25:1 375 14
207.5
37.5 142 214 730 490 35 36 125 246
117.5 152.5 226.5 261.5
280 534 261 319
J140 15/20/25:1 388 10 218 48 125 262 715 495 40 42 100 257 116 161 243 288 315 630 308 340
J160 15/20/25:1 428 14
252.5
52.5 137 297 715 495 40 42 140 290 129 174 254 299 355 712 331 390
J190 15/20/25:1 461 14 233 33 170 332 914 625 50 48 158 315
145.5195.5 275.5 325.5
400 824 403 453
J100 15/20/25:1 584 337 94 55 16 59 M20 100 28 106.4 3 249 236
J110 15/20/25:1 704 405 112 55 16 59 M20 110 28 116.4 4 288 331
J125 15/20/25:1 768 461 126 60 18 64 M20 125 32 132.4 4 335 414
J140 15/20/25:1 830 465 88 70 20 74.5 M20 140 36 148.4 3 346 585
J160 15/20/25:1 933 527 87 80 22 85 M20 160 40 169.4 4 379 776
J190 15/20/25:1 1103 623 136 90 25 95 M20 190 45 204.4 4 410 1076