![background image](http://html1.mh-extra.com/html/radic8/viruskiller-vk-102/viruskiller-vk-102_user-manual-and-instructions_3248979010.webp)
10
CLEANING THE PRE-FILTER
Replacing the HEPA filter
VK 102
The plastic pre-filter is reusable. To clean it,
follow this procedure:
1. Pull out the filter case
①
.
2. Remove pre-filter
②
from filter case
①
and
separate from carbon filter
③
and HEPA filter
④
3. Clean the pre-filter with a vacuum cleaner.
4. Place the filter back into the filter case.
VK 103
The plastic pre-filter is reusable. To clean it,
follow this procedure:
1. Pull out the bottom filter case
①
2. Remove pre-filter
②
from filter case
①
and
separate from carbon filter
③
and HEPA filter
④
.
3. Clean the pre-filter with a vacuum cleaner.
4. Place the filter back into the filter case.
5. Repeat the process for the top filter case
⑤
1. Pull out the bottom filter case
①
2. Separate the carbon filter
③
and HEPA filter
④
from the pre filter
②
3. Replace them with new filters.
4. Place them back into the filter case.
5. For the VK 103: Repeat the process for the
top filter case
⑤
6. Press the UP button on the Display for at least
5 seconds, to reset the Filter timer to zero.
CLEANING AND MAINTENANCE
HEPA filters (hrs)
6000
Carbon filters (hrs)
6000
When the Filter LED light changes to RED, it is time to replace the HEPA and Carbon filters. The
HEPA and Carbon filters are not reusable and should be replaced. Please contact your distributor to
purchase replacement HEPA and Carbon filters. Depending on the levels of pollution, the lifetime of
the HEPA filter may be longer or shorter than the recommended use times below:
1
4
3
2
Summary of Contents for Viruskiller VK 102
Page 1: ...USER GUIDE AND INSTRUCTIONS AIR STERILISER VK 102 VK 103...
Page 2: ......
Page 15: ......