![background image](http://html1.mh-extra.com/html/radic8/viruskiller-vk-102/viruskiller-vk-102_user-manual-and-instructions_3248979008.webp)
8
Remote control
sensor
Reactor Replacement
Alarm
Filter Replacement
Alarm
VOC’s Static Display
Dust Static Display (LED)
Display
Power button ON/OFF
Fan speed UP
Fan speed DOWN
LED ON/OFF
TIMER
UVC ON/OFF
Name
Function
Display and
Monitoring
Changes the information displayed on the LED in the following order: UV
Lamp Time, Current Temp, Fan Speed.
Remote Control
Sensor
Point your remote control at the sensor in order to use your remote oper-
ate the unit.
Reactor Replacement
Alarm
When this LED turns from blue to red, it is time to replace the reactor cell.
Filter Replacement
Alarm
When this LED turns from blue to red, it is time to replace the filters.
VOC’s Static Display
Color indicates air quality: blue – good, yellow – normal , red – poor
Dust Static Display
Color indicates air quality: blue – good, yellow – normal , red – poor
Timer
Sets a working time for the unit. The unit will stop after the specified time
has passed.
LED ON/OFF
Hold the “lamp” button down for a few seconds in order to switch the LED
lights ON/OFF.
UVC ON/OFF
Turns the UVC lamps ON or OFF. (Keep this on for air sterilization, keep it
off for simple air purification through the mechanical filters)
Fan Speed
Press the “Up” button to increase the fan speed. Press the “down” button
to decrease the speed. Fan speeds: FAN 1 (Quiet), FAN 2 (Normal), FAN 3
(High Speed).
Power button
ON/OFF
To switch the unit ON/Off. You will hear a beep sound.
DISPLAY AND MONITORING
Summary of Contents for Viruskiller VK 102
Page 1: ...USER GUIDE AND INSTRUCTIONS AIR STERILISER VK 102 VK 103...
Page 2: ......
Page 15: ......