background image

13

TROUBLESHOOTING

Before you call for service, review this list. It may save you time and expense. This list includes co-
mmon occurrences that are not the result of defect in workmanship or materials.

Problem

Possible cause

Solution

The product 

will not turn on

The plug is not properly insert-

ed in the grounded outlet. 

Plug the device into a working grounded 

outlet.

The remote control is out of 

battery power

Replace the batteries according to the 

polarity.

The voltage of the AC outlet is 

too low

Make sure you plug the unit into its dedi-

cated, grounded 220 AC outlet.

Weak airflow and 

noise from the 

product.

The pre-filter has accumulated 

too much dust.

Clean the pre-filter to avoid this problem 

Also change the HEPA filter when due.

The timer preset 

does not work.

The timer function has not been 

activated.

Set the timer, according to the instruc-

tions in this manual.

The air purifying 

function does not 

work properly.

The indoor air is heavily 

contaminated

The room requires ventilation. 

The pre filter is blocked

Clean the pre filter.

The HEPA filter is blocked

Replace the HEPA filter.

The room is too large for the 

unit

Select the right Viruskiller according to 

the room size.

The airflow is restricted

Make sure there is enough clearance 

around the product and that the air inlet 

and outlet of the unit are unobstructed.

Strange smell is 

emitted from the 

device.

New  product odour

The antimicrobial coating of the reactor 

cell might release a small amount of 

harmless odor. It should disappear in 

one to two weeks.

Moist filters

When cleaning the pre-filter with water, 

make sure it is completely dry before 

reinstalling.

The product has been used in 

environments with a high con-

centration of food odours.

Food odors are oily and can penetrate 

into the filter or the sterilizing module. 

Use proper ventilation.

The product has been used 

in environments with a high 

concentration of smoke.

In areas emitting too much smoke, the 

performance of the sterilizing module 

may be affected. Use proper ventilation.

Summary of Contents for Viruskiller VK 102

















Reviews: