background image

6

Switch the unit OFF, when 
cleaning a room. 

After cleaning, it is important 
to ventilate the room properly 
before switching the unit back 
ON.

Daily room ventilation for at 
least 30 minutes. 

The unit is designed to purify 

and sterilize your indoor air and 

will do this effectively when 
used correctly. Good indoor 
air quality also requires room 

ventilation.  We  recommend 

opening windows and doors, or 
operating the air conditioning, 
for a least 30 minutes a day.

Switch the unit OFF, while 
cooking. 

Oils released while cooking may 
reduce the life span of the ster-

ilizer.  After  cooking,  the  room 

must be ventilated to remove 
oils. You may now switch the 
unit ON to remove any smells.

Position the unit at least 3 me-
ters away from the bed, 

to avoid excessive cooling 
caused from sleeping in direct 

airflow. 

Airflow must NOT be restricted 

or obstructed, 

by large items such as furni-
ture, electronic items or cur-
tains. 

Use a dedicated power outlet.

Lightning or static electricity 
could affect the circuit and may 

cause a fire or damage the unit. 

To avoid this, plug the unit into 
a dedicated, grounded outlet. 

Do not alter or modify the plug 

or cord of this unit as it could 

cause a fire or an electric 

shock.

To protect against a risk of 

electric shock, do not immerse 

any part of the system in water 

or in any other liquids.

Do not attempt to repair or 
replace any part of this equip-

ment  unless  it  is  specifically 

recommended in this manual. 
All other services should be re-

ferred to a qualified technician.

Plug the unit into a 220V AC 

outlet only, if unsupervised, it 

may cause an electric shock.

Use the proper power cable 
and outlet, do not over-load 

the outlets with several cords 

simultaneously.

Keep the product away from 

inflammable  gases,  liquids,  or 

other combustible substances, 
as this could cause an explosion. 

220V

10

13

16

19

11

14

17

20

12

15

18

21

Summary of Contents for Viruskiller VK 102

















Reviews: