RADEMACHER RolloTube M-line, Translation Of The Original Operating And Assembly Manual

Page: 2 / 32

2
EN Contents
1. This manual... ..............................................3
2. Hazard symbols ...........................................3
2.1 Levels of danger and signal words ........ 3
2.2 Symbols and depictions used ................. 3
3. Safety instructions ......................................4
3.1 Intended use / operational
conditions ....................................................... 5
3.2 Improper use ................................................. 5
3.3 Required expert knowledge of the
installer ............................................................ 5
3.4 Glossary - Definition ................................... 6
4. Scope of delivery for RolloTube M-line
Small/Medium .............................................7
5. General view of the RolloTube M-line for
Small/Medium .............................................8
6. Functional description ................................9
6.1 Blockage detection function ................... 9
6.2 Obstacle detection function ..................10
6.3 Function of the shutter length
compensation .............................................10
6.4 Functions if the catch has been
mounted without the freewheel
mechanism ...................................................10
7. Important installation instructions .........11
7.1 Installation of the tubular motor..........11
7.2 Mounting the bearings ............................12
7.3 Determining the length of the
winding shaft (5) ........................................12
7.4 Mounting / dismantling the
adapter (10)..................................................13
7.5 Dismantling the catch (8)........................13
7.6 Mounting the catch (8) with the
freewheel mechanism..............................14
7.7 Mounting the catch (8) without the
freewheel mechanism..............................14
7.8 Sliding the tubular motor (9) into the
winding shaft ..............................................15
7.9 Preparation for use of the precision
tubes ..............................................................15
7.10 Mounting the roller capsule (4) ............17
7.11 Mounting the motor into the
bearings ........................................................17
7.11.1 Mounting into the drive
bearing as a click
bearing (13) ..................................17
7.11.2 Mounting in other drive
bearing versions .........................17
7.11.3 Mounting into the counter
bearing (1) ....................................18
7.12 Mounting the roller shutter (17) ...........18
7.12.1 Mounting the roller shutter
with rigid shaft connectors ....18
7.12.2 Mounting the roller shutter
with ties .........................................19
8. Safety instructions for the electrical
connection .................................................20
8.1 Connecting the motor cable (15) .........20
8.2 Electrical connection of the
tubular motor ..............................................21
8.2.1 Control of a drive from a single
point with a 1-pole switch /
button ............................................21
8.2.2 Parallel connection of several
motors ............................................21
8.3 Connection of the universal setting
cable for manual end point setting .....22
8.4 Connection of a cord-switch setting
unit for manual end point setting .......22
9. Self-learning mode with smooth stop .....23
10. Manual adjustment of end points ...........23
10.1 Test run / modifying the end points ...25
11. Reloading the factory settings .................25
12. What to do if... ? .........................................26
13. Technical specifications ............................27
14. Configuration of KNX/EIB Venetian blind
actuators for RADEMACHER tubular
motors ........................................................27
15. Simplified EU declaration of
conformity .................................................28
i