19
EN
(20)
24
21
22
(6)
(5)
(17)
(17)
SW40
23
1.
Mount the shaft connectors
(6)
at the winding
shaft
(5)
.
In order to do so, follow the information provided
in the operating manual for shaft connectors.
2.
Slide the retainer profile for each shaft connector
(6)
onto the uppermost slat of the roller shutter
(17)
.
3.
Subsequently slide each retainer profile over a
shaft connector
(6)
.
Mounting roller shutter stoppers or an end rail
7.12.2 Mounting the roller shutter with ties
1.
Slide the ties onto the uppermost
slat of the roller shutter.
Place a tie every 40 cm into the rectangular holes
of the winding shaft.
For
SW40 winding shafts
(with external groove),
use suspension clamps in order to mount the ties.
1.
Finally, mount two roller shutter stoppers
(20)
or
an end rail onto the lowermost slat or rail of the
roller shutter
(17)
.
Otherwise, the upper end point must be learned
manually.
