37
o
Edit picket.
Editing should be always performed consequently from left to
right along the profile. After
Edit picket
option has been selected, place your
cursor at the place of the picket where the failure has occurred. Press and hold left
mouse button and move it to the location where you think the interface should
pass. Release the button to confirm. You can repeat this operation multiple times
until you achieve a satisfactory result. If you wish to save picketing results as
ASCII file, place cursor to the picket line, press right mouse button and select
Save
as ASCII file
option in the pull down menu. Enter filename and press
Save
button.
As default the program will offer the same filename as initial file name with
.txt
extension.
o
Close
– exit from the annotations mode.
Color palette
– color palette editing. Any color from 24-bit palette is available in
“
Prism2
”. Color palette is used for data output in line scan mode (Fig. 10.1), as well
for the positive half-wave output when the wiggle plot mode is used (Fig. 4.2). You
may use up to ten basic colors and their relative levels for the color palette. You could
open the palette window by pressing a respective Toolbar button or by selecting
Tools/Color palette
menu option, or by clicking a left mouse button on the color
palette column located in the upper right corner of the profile window to change the
color palette.
Fig. 10.8. Palette color editing dialog box.
Following actions could be applied in appeared Palette color editing dialog box (Fig.
10.8):
o
Choose one of eight already created palettes. To do this, press
Load
button and
select palette from existing ones provided in pop-up window. Press
OK
to confirm
your choice.