rada V10 Product Manual Download Page 3

3

1143923-W2-E

Patents and Design Registration

Patents:

GB: 

2 291 693, 2 340 210, 2 392 225, 

 

2 421 297

Euro: 

1 672 257 DE, FR, GB, IT, NL, SE

USA: 

7 240 850

Patent Applications:

Euro: 
USA: 2006-0124758-A1

SAFETY:WARNINGS

Rada thermostatic mixers are precision 

engineered and should give continued safe and 

controlled performance, provided:

1.

  They are installed, commissioned, operated 

and maintained in accordance with 

manufacturer’s recommendations.

2.

  Type 2 Valves are only used for applications 

covered by their approved designations, refer 

to the TMV2 Requirements Manual.

3.

  Periodic attention is given, when necessary, to 

maintain the product in good functional order.

Caution!

1.

  Read all of these instructions.

2.

  Retain this guide for later use.

3.

  Pass on this guide in the event of change of 

ownership of the installation site.

4.

  Follow all warnings, cautions and instructions 

contained in this guide.

5.

  Anyone who may have difficulty understanding 

or operating the controls of any shower should 

be attended whilst showering. Particular 

consideration should be given to the young, 

the elderly, the infirm or anyone inexperienced 

in the correct operation of the controls.

6. 

Rapid/Excessive movement of the flow and/

or temperature control levers may result in 

momentary unstable blend temperatures.

7.

  Care is required when adjusting flow or 

temperature, make sure that the temperature 

has stabilised.

8.

  When this product has reached the end of its 

serviceable life, it should be disposed of in a 

safe manner, in accordance with current local 

authority recycling, or waste disposal policy.

Summary of Contents for V10

























Reviews: