RACOM MG101, User Manual

Page: 78 / 107

User manual
78 / 107
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
3.2 Configuration Parameters of the MG101/102
The information in this chapter is needed to configure MG101/102 via the Command Line Interface or File
Configuration. If you are using the Web Manager and its forms to configure MG101/102, you may skip this
chapter.
A configuration parameter consists of two main parts, its name (latter called key) and its value. The user
configuration file contains all parameters. Download this file (user-config.cfg) using the Web Manager to get
all parameters listed.
Racom has defined some types of parameters that are often used. The table below shows the defined pa-
rameter types. In addition other types of parameters may exist.
Parameter
Type Allowed characters Format Description
email a-z
A-Z
0-9
_-.
@ (mandatory)
user@hostname String must include “@”
Second part must be a valid host-
name
hostname a-z
A-Z
0-9
_-.
Fully-Qualified Host Name (FQHN)
or host name
ipaddress Numbers and dots xxx.xxx.xxx.xxx Decimal dotted notation
netmask Numbers and dots xxx.xxx.xxx.xxx Decimal dotted notation
username a-z
A-Z
0-9
_-.
@
password All but &, \", \'
phone number +
0-9
*
#
time 0-9, and : hh:mm:ss Time, e.g. for automatic software or
configuration update