RACOM MG101, User Manual

Page: 13 / 107

User manual
13 / 107
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
1.6.2 The Back Panel
The back panel has the interfaces described in the table below:
Panel Label Color State Function
Back GPS Antenna
(
MG102-xGx
only)
- - GPS antenna connector (MG102-1GN and MG102-2GN)
Impedance: 50 Ohm
Connector: SMA female
MG102-1GN supports active GPS antennas.
MG102-2GN and MG102-2GW support passive GPS anten-
nas only
Back UMTS / GSM
Antenna - - UMTS / GSM antenna connector
Impedance: 50 Ohm
Connector: SMA female
Back COM - - Sub-D 9 or RJ45 port
RS232 (default) or RS485 (configurable)
Back Ethernet Ports - - 4 port Ethernet switch
The default IP address is set to 192.168.1.1.
Back Power - - Voltage feed connector (9-32 VDC)
on Physical link
off No physical link
Back Link/Activity
(Ethernet Ports)
green
flashing Data transmission
on Data rate 100 MBit/s Back Speed 10/100
(Ethernet Ports)
green
off Data rate 10 MBit/s
Table 5: Components on the back panel