RACOM MG101, User Manual

Page: 11 / 107

User manual
11 / 107
GPRS/EDGE/UMTS routers MG101, MG102
3. Jul 2009
1.5.2 Physical Interfaces MG101-1NN
Please find the description of each interface in the following table:
Panel Label Component Description
Top RST Restart: press this button when the status LED is on
Factory reset: press and hold this button for at least 5 seconds.
Top Power Voltage feed connector (9-28 VDC)
Top IN1
IN2
Digital inputs
2 optoisolated digital inputs. Please consider the polarity.
Top OUT1
OUT2
Digital outputs
2 relay outputs
Bottom ETH Ethernet port
The default IP address is set to 192.168.1.1.
Bottom COM RS232, Sub-D 9 port
The factory default is 115200 Baud, 8 Data Bits, no parity, 1 Stop Bit.
Bottom SIM 1 SIM socket
Right ANT GSM antenna connector
Impedance: 50 Ohm
Connector: SMA female
Table 3: Physical interfaces