Analog Output
Configuration Screen
(EPS06 only):
Display Functions:
Absolute Position
Selected Analog signal
Scaling of Analog Signal
Input Functions:
Selection of Analog Signal
Scaling of min Position
Scaling of max Position
Analog Output Function:
With the pull
down menu “Analog Output Function” the
following selections can be made: 0-10V,
10-0V, 0-20mA, 20-0mA, 4-20mA and 20-
4mA. Based on the selection “Cylinder max
Stroke“ from the main screen the ”Limits for
Analog Output Signal” slide bar is
initialized. The two slide potentiometers on
the left and right side of the slide bar make it
very easy to adjust the offset and gain of the
analog output signal in relation to the desired
stroke length. In most cases, the end of stroke
limit switch “Switch Position” and the
potentiometer slide values coincide.
