Racelogic Ltd PerformanceTools Software
02/05/2014
Page 57
Replaying Laps (DriftBox Tools Only)
If you have recorded laps loaded into the software you can replay them, by clicking on the
Replay button. By default the cursor will move through the Graph window and round the path
in the Graph:Map window at the same speed at which the file was recorded. However by
clicking on the arrow to the right of the button a faster replay speed can be chosen.
When the Replay button is pressed the Drift Meter and Sector windows will also appear, but
these can be closed if not required.
Whilst the file is being replayed the cursor in the Graph:Map will move around the path taken.
If more than one lap is currently being viewed there will be a cursor for each run, and these
will move around the circuit in a manner according to how the graph window x axis has been
set: if the Graph window is displaying speed over distance, the cursors will move around the
circuit together, as the distance covered during each lap will be virtually identical. However, if
the Graph window is set to speed over time then the cursors will travel according to the
actual lap times.
Note in this example (below) how the green triangle is behind the red and blue triangles
–
this is a snapshot of three individual laps being replayed when the Graph screen has been
set to speed over time. This feature allows for ‘live’ analysis of where a driver is gaining or
losing time, and on which part of the circuit.
