3152A User Manual
Using The Instrument 3-6
Racal Instruments
©
2001
The command:
APPLy:
RAMP
{<frequency>,<amplitude>,<offset>,
<delay>,
<rise_time>,<fall_time>}
programs the synthesizer to output a ramp waveform with
frequency, amplitude, offset, delay, rise time, and fall time
parameters. The default settings for these functions are: 1 MHz,
5 Vp-p, 0 V, 0%, 10% and 10%.
The command:
APPLy:
SINC
{<frequency>,<amplitude>,<offset>,
<number_cycles>}
programs the synthesizer to output a sine(x)/x waveform with
frequency, amplitude, offset, and number of cycles parameters.
The default settings for these functions are: 1 MHz, 5 Vp-p, 0 V
and 10.
The command:
APPLy: EXPonential <frequency>,<amplitude>,<offset>,
<exponent>}
programs the synthesizer to output an exponential waveform
with frequency, amplitude, offset, and exponent parameters.
The default settings for these functions are: 1 MHz, 5 Vp-p, 0 V
and -10.
The command:
APPLy:
GAUSsian
{<frequency>,<amplitude>,<offset>,
<exponent>}
programs the synthesizer to output a gaussian waveform with
frequency, amplitude, offset, and exponent parameters. The
default settings for these functions are: 1 MHz, 5 Vp-p, 0 V and
10.
The command:
APPLy: DC {<percent_amplitude>}
programs the synthesizer to output a DC level. The DC level is
set as a percent of programmed amplitude. The default setting
for this function is 100%.