1260-100/101 Adapt-a-Switch Carrier Module User Manual
Racal Instruments
1998
Maintenance 4-3
responds with AA
16
, which is the one’s compliment of the
data written.
21. In the data field, enter AA
16
. Click on GO. If the plug-in is
a relay type (not a digital type), you should hear the relays
open.
22. Select the READ mode, set the number of bytes to at
least 1, and click on GO. Verify that the Option-01T
responds with 55
16
, which is the one’s compliment of the
data written.
23. Repeat steps 12 through 17 for each of the remaining
plug-ins.
24. Turn the chassis power switch off.
25. If fewer plug-ins are available than the number of slots,
repeat steps 5 through 18 with the plug-ins in different
slots until all carrier slots have been tested.
26. For the 1260-100 set the module address switch on the
carrier to the 7-12 position. Repeat steps 5 through 20.
When calculating the address offset in step 12, remember
that the module addresses now range from 7 through 12.
Summary of Contents for 1260-100
Page 5: ......
Page 6: ...This page was left intentionally blank...
Page 7: ......