![background image](http://html1.mh-extra.com/html/rabe/turboseed-pro/turboseed-pro_original-instructions-manual_3146749013.webp)
Before start-up
GB
Recommendations for use
A
When drilling, it is absolutely essential to lift the machine up when turning in the field. It is not
advisable to turn too tightly when drilling.
Rabe cannot be held liable in any way in the event of an accident arising due to the use of the
machine that does not comply with the instructions.
The presence of stones, rocks, stumps or other
obstacles must be taken into account. The drill must be
driven appropriately.
The operating speed for drilling must not exceed 12
km/h.
However, it’s compulsory to adapt the speed
according to the soil cultivation tool, in this case,
check in the user book and the lowest speed will be
the reference.
Variations in the results of drilling and plant emergence
cannot be completely excluded in spite of the care
taken by Rabe in the design and manufacture of this
seed drill, even when it is used in full compliance with
the instructions.
The factors that may have an impact on the success of
drilling are:
- Seed quality (coatings, treatments, density, vigour,
germination rate, etc.)
- Problems with the structure or heterogeneity of the
soil, presence of pests (slugs, field mice).
The TURBOSEED seed drill has been designed and
constructed for drilling all kinds of commonly used
seeds in a variety of different situations.
Nevertheless, it is essential to follow the
manufacturer’s recommendations and to work carefully
and sensibly.
It must be used only by skilled and trained operators.
It is possible that there will be occasions where the
ground is either too wet or too dry to use the drill
properly.
In some of these difficult conditions, using your drill
may result in damage to the machinery or to the soil.
Rabe cannot be held responsible for damage caused
by improper use of the machine.
Any modification to the machine carried out without
Rabe’s approval will automatically invalidate the
manufacturer’s guarantee.
Minimum tillage drilling must be carried out on level,
firmly consolidated ground where the harvest residues
have been properly incorporated beforehand.
13
1
1
Avant la mise en route
FR
Préconisation d’utilisation
A
Lors des semis, il est absolument nécessaire de relever la machine pour faire un demi-
tour dans le champ.
Il n’est pas souhaitable de décrire des courbes trop prononcées en semant.
La responsabilité de Rabe est totalement dégagée en cas d’accident survenant lors
d’une utilisation de la machine non-conforme aux prescriptions.
pratiqués sur un sol nivelé et fermement rappuyé avec
des résidus de récolte correctement répartis au
préalable.
La présence de cailloux, rochers, souches ou autres
obstacles doit absolument être prise en compte et la
conduite du semoir doit être adaptée.
La vitesse d’utilisation ne doit pas excéder 12 km/h en
semis.
Cependant, il est obligatoire d’adapter sa vitesse en
fonction de l’outil de travail du sol, dans ce cas
consulter la notice d’utilisation de l’outil de travail du
sol.
La vitesse la moins élevée servira alors de référence.
Des variations dans les résultats des semis et leurs
levées ne peuvent être totalement exclues malgré le
soin apporté par Rabe dans la conception et la
fabrication de ce semoir, même lors d’une utilisation
conforme.
Les facteurs pouvant intervenir dans le succès des
semis sont :
- Qualité des semences (enrobages, traitements,
densité, vigueur, taux de germinabilité etc.)
- Problème de structure ou d’hétérogénéité des sols,
présence de ravageurs (limaces, mulots).
Le semoir TURBOSEED est conçu et construit pour
semer
toutes les semences courantes dans des situations
très différentes.
Toutefois, il est indispensable de respecter les
recommandations du constructeur et de travailler
avec
prudence et bon sens.
Il doit être utilisé exclusivement par du personnel
qualifié et formé.
Lors de son utilisation, il est possible de rencontrer
des situations où les sols sont trop humides ou au
contraire trop secs pour pouvoir faire fonctionner
correctement votre semoir.
Certaines de ces situations difficiles peuvent conduire
à des dommages pour votre semoir ainsi qu’à votre
sol.
Rabe ne peut pas être tenu pour responsable des
dommages occasionnés lors d’une utilisation
inappropriée.
Toute modification de la machine opérée sans
l’accord
de Rabe annule automatiquement toute garantie du
constructeur.
Les semis sur préparations simplifiées doivent être
Summary of Contents for TURBOSEED PRO
