- 47 -
M
AINTENANCE
KORMORAN SF 180 / SF HA 180
9901.00.07EN04SF - 02/2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
MAINTENANCE
CAUTION:
Observe the safety instructions (see 2) before
starting service work or replacing spare parts.
• The operator and the owner are responsible for the
implement's maintenance.
• Before commencing any work on the implement,
switch off the engine and remove the tractor's
ignition key.
• Risk of trapping or crushing injuries during
maintenance or cleaning.
• Stabilise the implement before performing any
maintenance or cleaning operations.
• Make sure that the implement cannot be
inadvertently operated while carrying out
maintenance or cleaning work.
CAUTION:
Make sure that your safety is assured by the
techniques used to raise the implement.
CAUTION:
7\UHVPXVWEH¿WWHGDQGUHPRYHGE\TXDOL¿HG
personnel.
IMPORTANT:
The operator and the owner of the implement must
not under any circumstances tamper with or adjust
sealed components.
10 P
ROTECTION
OF
THE
ENVIRONMENT
10.1 Soil
contamination
IMPORTANT:
Take care not to spread waste grease and
substances such as hydraulic oil on the ground or to
dispose of them in the drains.
IMPORTANT:
Collect the drained hydraulic oil in sealed, clean and
containers provided for this purpose.
10.2 Worn
tyres
CAUTION:
It is prohibited to store, abandon, deposit tyres in
the environment or to burn them in the open air.
Take them to an approved dealer or collection point.
11 C
LEANING
Clean the implement.
ʈ
When cleaning with a high pressure cleaner, do not direct the
jet at joints, bearings etc. or at electrical components.
ʈ
3D\VSHFLDODWWHQWLRQWRVDIHW\VWLFNHUVDI¿[HGWRWKH
implement. Damaged or detached stickers must be replaced.
ʈ
Do not use compressed air to clean hydraulic components.
ʈ
Perform complete lubrication of the implement after each
cleaning.
12 I
NSPECTION
IMPORTANT:
Inspect implement after each use and perform the
required repairs.
ʈ
Check the general state of the implement :
-
The welds.
-
The wheels, tyres and the wheel studs.
-
The bolts of wearing parts under stony conditions (strong
YLEUDWLRQV
12.1 Checking the hydraulic system
CAUTION:
1(9(5SODFHDKDQGRYHUHVFDSLQJK\GUDXOLFÀXLG
Leaks must be located with a tool. Risk of injury
RULQIHFWLRQGXHWRK\GUDXOLFÀXLG+\GUDXOLFÀXLGV
escaping under high pressure are able to penetrate
the skin and cause serious, even fatal injuries.
CAUTION:
Your implement may be equipped with hydraulic
accumulators. These are pressurised and the
removal of accumulators or their piping is forbidden.
7KLVRSHUDWLRQPD\RQO\EHSHUIRUPHGE\TXDOL¿HG
personnel (consult your dealer).
CAUTION:
Before working on the hydraulic circuit, set the
implement down on the ground and depressurise
the hydraulic circuit.
CAUTION:
1HYHUKHDWZHOGVDZJULQGRUÀDPHFXWFORVH
to hydraulic circuits or components or any
RWKHUÀDPPDEOHSDUWV)RUZHOGLQJZRUNRQWKH
implement, disconnect the tractor battery and
protect the hydraulic circuits so that they are not
damaged by welding sparks and spatter.
