- 38 -
O
PERATOR
'
S
MANUAL
KORMORAN SF 180 / SF HA 180
9901.00.07EN04SF - 02/2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
IMPORTANT:
It is recommended to place the wheel as close as
possible to the beam. The distance from the frame
can be changed by moving the pin to one of the
WKUHHSRVLWLRQV7KLVPRGL¿FDWLRQPXVWEHPDGH
when you change the wheel (to one of a different
diameter or type).
9.2.3 Tilt
adjustment
7LOWDGMXVWPHQWVLGHWRVLGHOHYHOOLQJFDQRQO\EHSHUIRUPHG
ZKHQWKHUHLVDIXUURZWR¿OO
9.3 Second
pass
%HIRUH¿QDOLVLQJWKHVHWWLQJVPDNHVXUHWKDWWKHPRXOGERDUGV
are polished and soil slides without sticking, otherwise clean
them.
,QVWLFN\VRLOZKHQ¿UVWXVLQJUHPRYHWKHSRLQWVWKLVFDQ
accelerate the stripping of the mouldboards.
9.3.1 Longitudinal
levelling
2
2
1
1
The 2nd pass is made with the tractor in the furrow. The machine
must be level so that all the bodies work at the same depth.
Adjustments
ʈ
Set the working depth with the screws of the rear wheel.
ʈ
Adjust the tractor lifting height to level the machine.
ʈ
Place the top link.
-
When working, the top link must be at a higher level on the
implement side than the tractor side, which ensures good load
transfer to the front of the tractor. It must be ensured that:
1 < 2.
-
Adjust the length of the top link, so that the yoke is parallel to
the ground when working.
