26
/ 54
User Manual
Rev. 2.0 - 27/01/20
TEX3500LCD
5.3.3 Power Amplifier (P.A) Menu
This screen is made up of four lines that can be scrolled using the and
buttons and shows the readings relating to final power stage:
Menu 7
Note that these are readings, rather than settings, and cannot be edited (note the
empty arrow).
VPA
Voltage supplied by amplifier module.
IPA
Current draw of amplifier module.
Eff
Efficiency based on ratio of forward power to amplifier module power,
in percent ( FWD PWR/(Vpa x Ipa) % ).
Tmp
Equipment internal temperature reading.
5.3.4 Setup Menu (Set)
This menu lets you view and set operating frequency.
The FSK function generates periodic carrier frequency shifts to generate a Morse-
coded station ID code.
NOTE:
This function is typically used in the USA.
The factory setting for frequency shift amplitude is +10KHz and code repetition
period is 60 minutes (please contact R.V.R. Elettronica if you need different
settings), whereas station identified may be programmed by the user following
the indications provided in next section.
Menu 7
