TEX3500LCD
21
/ 54
USer Manual
Rev. 2.0 - 27/01/20
1c) To
modify power level setting
, hold down the
ENTER
button until opening
the
power setup menu
.
The edit screen will look like this:
Menu 3
The bottom line provides instantaneous power reading (in this example 3.5kW for
TEX3500LCD
, falling below 1.6kW the reading back to Watt. As result of hysteresis
power up , exceeding 1400W the reading back to kWatt); press button to
increase level, press to decrease it. When you have achieved the desired level,
press
ENTER
to confirm and exit the
default menu
. Please note that the setting
is stored automatically; in other words, if you press
ESC
or do not press any keys
before the preset time times out, the latest power level set will be retained.
NOTE:
This feature prevents the machine from delivering maximum power as
soon as output is enabled from menu 4, or in the event the machine is already
set to
ON
and energised.
1d) If the equipment is not used for some time, it will enter in
STAND-BY mode
,
where the screen will remain backlit and indications on time and date will be
indicated on the display.
Menu 0
Press press any button to exit from this screen.
2) Ensure that machine is not in a locked-out state. Press the
ESC
key to call up
the selection screen (Menu 3). Highlight
Fnc
and press
ENTER
to confirm and
access the appropriate menu (menu 4).
In the same menu, ensure that power limiting is disabled: if
PWR
is set to
OFF
,
i.e. power output is disabled, move cursor to
PWR
. Press
ENTER
and label
will switch to
ON
, i.e. power output enabled.
Press
ESC
twice to go back to the
default menu
(menu 1).
3) Fine tune power setting from menu 2 (see description of item 1b) until achieving
the desired value.
WARNING: Machine is capable of delivering more than rated output power (3500
W for
TEX3500LCD
)
; however, never exceed the specified power rating
.
