4 / 30
User Manual
Rev. 1.2 - 21/01/11
TEX2000LCD
• Power output enable/disable.
• Power Good feature (User-selectable output power alarm threshold).
•
Measurement and display of transmitter operating parameters.
•
Communication with external devices such as programming or telemetry
systems via RS232 serial interface or I2C.
Four LEDs on the front panel provide the following status indications: ON, LOCK,
FOLDBACK and RF MUTE.
The exciter management firmware is based on a menu system. User has four
navigation buttons available to browse submenus: ESC,
,
, and ENTER.
The rear panel features the mains input connectors with a mains voltage switch
to select the appropriate mains input voltage, as well as audio input connectors
and RF output connector, telemetry connector, protection fuses and two inputs
for signals modulated onto subcarriers by suitable external coders, such as RDS
(Radio Data System) signals commonly used in Europe.
