R.V.R. Elettronica PJ20KPS-C, User'S & Technical Manual

Page: 109 / 114

ELETTRONICA
Rev. 1.2 23/07/2012
103
User & Technical Manual
PJ20KPS-C/PJ25KPS-C
TX20kwPS2ptx
This will open the following screen
Connect the GSM modem to a PC serial port (for those who no longer have the serial port
you can use a USB converter - RS-232, not supplied).
Set the following parameters:
Telephone Number: set the phone number of the SIM present in the GSM telemetry, of
transmitter, we want to control (Note: there is always the number in front of the interna -
tional prefix of the state where you are eg. +39 for Italy).
Com: select the serial port in use on the PC (COM1,COM2,ecc...)
Baud: is the speed of the serial port, should always be 9600 otherwise it will you commu-
nicate
Type: is the type of connection between PC and telemetry, in this case, select “GSM”
Press the button “Return” at the top right and return to the main screen.
Press the “Start Connection” and at this point will be the link.
Now follow the steps previously listed.