R.V.R. Elettronica PJ20KPS-C, User'S & Technical Manual

Page: 23 / 114

ELETTRONICA
Rev. 1.2 23/07/2012
17
User & Technical Manual
PJ20KPS-C/PJ25KPS-C
Figure 5-11
5.1.9 Exciters Menù
Figure-12
This menu is used to configure the settings of the exciters (Figure 5-12).
Menu Line Description
Main Exc Output power of the exciter currently on air
Stdby Exc Output power of the exciter currently on the internal dummy load
Main Exciter Visualization of the “on air” exciter. When positioning the cursor on
this line, with the arrow buttons and by pressing OK, it is possible to
operate the switching between the on air exciter and the exciter on
dummy load.
Exct.1 Status of the exciter 1. By positioning the cursor on this line with the
arrow buttons and by pressing OK it is possible to switch on and off
the exciter.
Exct.2 Same as Exct.1 for the second exciter
Nota: the exchange of the eccitatori and the relative cursor are available only if the logic
of exchange is set to manual and the yellow LED is lit.