R.V.R. Elettronica PJ20KPS-C, User'S & Technical Manual

Page: 97 / 114

ELETTRONICA
Rev. 1.2 23/07/2012
91
User & Technical Manual
PJ20KPS-C/PJ25KPS-C
TX20kwPS2ptx
This will open the following screen
The first time will need access to the telemetry via the DB9 cable, so you can set the details
of the station and telephone numbers to which messages will be sent.
Plug the cable into a PC serial port (for those who no longer have the serial port you can
use a USB - RS-232 converter, not supplied), and the other end is connected to the RS232
port of the telemetry (if it has already been added to the bridge between the modem and
RS-232 remove)
Set the following parameters:
Com: select the serial port in use on the PC (COM1,COM2,ecc...)
Baud: is the speed of the serial port, should always be 9600 otherwise it will you commu-
nicate
Type: is the type of connection between PC and telemetry, in this case, select “Cable”
Press the button “Return” at the top right and return to the main screen.