R.V.R. Elettronica PJ20KPS-C, User'S & Technical Manual

Page: 32 / 114

ELETTRONICA
PJ20KPS-C/PJ25KPS-C
User & Technical Manual Rev. 1.2 23/07/2012
26
Combiner-2
-Rfl -Ant Alarm reflected power antenna
-Rfl -Ld1 Alarm reflected power on load 1
Control Unit
-Fwd forward power alarm module
-Rfl reflected power alarm module
-In alarm input power module
-Tmp. high temperature alarm
-Drv. I driver current above its limit
-Mos 1 I high current alarm mos1
-Mos 2 I high current alarm mos2
-Mos 3 I high current alarm mos3
-Mos 4 I high current alarm mos4
-Eff. efficiency too low
-Fuse module’s fuse broken
-O.Tmp. overheating on the module’s heatsink
Various general
-Derating single transmitter derating (overall status menu)
-Sys derating entire system derating (overall status menu)
-Replay err. bad response from the interrogated module (overall status menu)
-Safety pressed the emergency button (menu control unit)
Time-out questioned the module does not respond (overall status menu)
Default Talk
Address: 31
address for the default configuration (start of MCU)
Device not
configured
control unit is not configured (at the start of MCU)
Waiting for Retry:
xxxx sec.
to clear the hold press the ok button (menu ouyput power)
Start Up in
Progress
Booting up (start of MCU)
Please Wait Please wait ..... (start of MCU)