Operating the Machine in MMA mode
Connect the following:
1.
Negative welding power connector
Connect the earth cable dinse plug into here and twist to secure
2.
Positive welding power connector
Connect the electrode holder cable dinse plug into here and twist to secure
Most popular rods have a positive welding electrode and negative earth. If you are using special
electrodes check the manufacturer’s recommendation for correct polarity of welding electrodes
and connect as required.
1. Ensure machine is setup as previously stated
2. Fit desired electrode size in electrode holder
3. Switch on machine
4. Select desired welding power
5. Touch electrode on to workpiece and the arc will start
When the machine is switched on, output terminals are always live, take care and do not
touch electrode and earth by person at same time, otherwise an electric shock will occur.