1. The "high recovery" light
(A) (
red)
will
illuminate and the horn will sound when the
recovery tank is full. Stop immediately and drain
the recovery tank. (See picture to the left)
2. If the red light is ignored the vac motor will
overheat.
3. If the vac motor is pulling excessive current,
circuit breaker
(B)
(50 amps) may blow to
prevent damage. If this occurs contact your
service agent.
4. Vac switch (C) is set to engage at 45-50" of lift.
5. If foam or water gets past the recovery
tank
"
vac screen/ball system" (C)
the
"unloader valve" (D)
will drain it from the vac box.
(See picture to the left and picture below)
6. "Unloader valve" (D) is located on the bottom of
the vacuum box in front of the vac motor.
(See picture to the left)
Vac System
PAGE 18
A
B
C
C
D
