PAGE 14
***
FOR CORRECT PAD APPLICATION , CALL YOUR LOCAL DEALER
***
1. Turn "on" machine power.
2. Raise the scrub deck by depressing the
brush switch
(A)
to the
("0")
position and turn
machine power "off". Disconnect batteries.
(See picture to the left)
3. Loosen knobs
(B)
and remove shrouds to access
scrub deck (See picture to the left)
4. Attach pads to pad drivers before connecting
pad drivers to motor hub. (See picture to the left)
5. Attach brushes or pads to motor hubs.
squeeze the scissor locking device
(C)
and lift
brush up on to the motor drive hub. Make
sure the scissors close and lock once the
brushes are on. (See picture to the left)
6. When brushes are attached put shrouds
back on machine and tighten knobs.
Attaching Disk Brushes/Pads
A
B
B
C
