®
R&M Materials Handling, Inc
STAGEMAKER
®
COMPACT Concert Hoist
Springfield, Ohio USA
SM10 Installation & Maintenance Manual
: 800 955-9967
web:
www.rmhoist.com
June 2006
5 June 2006 46 SM10-M & I MANUAL - 2006 - 0.doc.
6.12.3 Rotary Geared Limit Switch Assembly Part Numbers
CHAIN LENGTH
(FT)
RATIO
2 SWITCHES
4 SWITCHES
0 – 42 FT.
4.06 to 1.0
2249076
2249077
43 – 98 FT.
15 to 1.0
2249078
2249079
Configuration – SM 10
Rotary limit with 2 switches
Rotary limit with 4 switches
A
NOT AVAILABLE
NOT AVAILABLE
B OPTIONAL
OPTIONAL
C OPTIONAL
OPTIONAL
D
MUST USE 4-SWITCH LIMIT
STANDARD
E OPTIONAL
OPTIONAL
Note: Rotary limit switch assembly cannot be added to a Hoist in the field. The hoist must
have the rotary limit switch assembly provided at time of initial production.
Adjustment
The position of the air-gap between the two discs (red – gray) determines the stopping place. This
position can be found by gently turning the two discs. The length of air gap determines length of reset
play in opposite direction.
To reset rotary limit once it has tripped, load block assembly must travel a total of 11” [27cm] in opposite
direction.