background image

User’s Manual v.15 

 

QVidium

®

 H.264 HD Video Codecs

 

 

 

Copyright 2011-2014 QVidium

®

 Technologies, Inc. 

Page 4 of 71  

 

 

Introduction

 

 

 
Congratulations on purchasing your new QVidium

®

 broadcast video networking product. 

 

 

 

QVidium

®

 H.264 HD video networking 

products 

– Front View,  

Clockwise from upper left: QVENC encoder, 
QVDEC decoder, and QVPRO codec 
 
 

1.1  Overview 

 

QVidium’s collection of broadcast video network products includes the QVENC HD H.264 video 
encoder and its corresponding QVDEC decoder. These products are derived from 

QVidium’s 

original 

QVPRO HD Video Codec™ (currently available only by special order).  The QVENC and 

QVDEC use the same video processor and same firmware as the QVPRO H.264 HD Video 
Codec™. The QVPRO can encode, decode, or transcode standard or high definition video using 
either MPEG2 (main profile) or MPEG4-AVC (Part 10, H.264 High Profile, Level 4.1) compression, 
and to interface a video feed from a wide range of video standards and connections for transport 
over nearly any IP network.  

The QVENC includes the encoding and transcoding capabilities of the QVPRO. However while the 
QVPRO has SDI and HDMI inputs, the QVENC keeps the SDI/HD-SDI/3G-SDI interface, but 
replaces the HDMI input with Composite and S-Video inputs. It also adds two pairs or analog audio 
inputs and an S/PDIF input for AC3 Dolby Digital audio. The QVDEC implements the decoding 
functionality of the QVPRO. However, in addition to the SDI/HD-SDI/3G-SDI and HDMI outputs, it 
also adds a Composite video output, 2 pairs of stereo analog audio outputs, and an S/PDIF output 
for AC3 audio. 

All of these QVidium video networking products include 

QVidium’s patented, advanced ARQ Error 

Correction and clock synchronization. In addition, they also include the option of using industry 
standard ProMPEG FEC, or SMPTE-2022, for compatibility with third-party products. With these 
advanced Quality of Service (QoS) features, the H.264 HD Video 

Codec™ can send video over 

nearly any network and across the world, including wireless connections and the public Internet, 
with unsurpassed video transport quality and state-of-the-art video compression for minimizing 
bandwidth. 

 

1.2  Network Setup 

 

The QVPRO includes two gigabit Ethernet ports, labeled 

LAN1

 and 

LAN2

. The QVENC and 

Summary of Contents for QVDEC








































































Reviews: