background image

User’s Manual v.15 

 

QVidium

®

 H.264 HD Video Codecs

 

 

 

Copyright 2011-2014 QVidium

®

 Technologies, Inc. 

Page 31 of 71  

4.2.1  URL Control  

There are 2 URLs, one to get the current video bitrate and a second url to set the video bitrate.  
These URLs return plain text (no HTML) to simplify parsing.  The "

Encoder->Bitrate

" link in the 

web UI allows you to set the video bitrate with a browser.  
 

/cgi-bin/encoder_bitrate2.cgi

: Gets the current video bitrate.  Returns 

VIDEO_BITRATE=xxxxxxx, where xxxxxxx is the current bitrate.  
 

/cgi-bin/encoder_bitrate2.cgi?VIDEO_BITRATE=xxxxxxx

: Sets the video bitrate where xxxxxxx 

is the desired bitrate. Returns VIDEO_BITRATE=xxxxxxx where xxxxxxx is the bitrate that was 
set.  The maximum video bitrate is 25000000.  
 
Examples of using the wget command. The initial bitrate was 23Mbps.  
 

$ wget -q -O - 

http://root:[email protected]/cgi-bin/encoder_bitrate2.cgi

  

VIDEO_BITRATE=23000000  

$ wget -q -O - 

http://root:[email protected]/cgi-bin/encoder_bitrate2.cgi?VIDEO_BITRATE=9000000

  

VIDEO_BITRATE=9000000  

$ wget -q -O - 

http://root:[email protected]/cgi-bin/encoder_bitrate2.cgi

  

VIDEO_BITRATE=9000000  

$ wget -q -O - 

http://root:[email protected]/cgi-bin/encoder_bitrate2.cgi?VIDEO_BITRATE=500000000

  

VIDEO_BITRATE=25000000 
 

4.2.2  Command-line Control  

The program, /qvidium/qvctrl, allows you to communicate with the encoder via a command-line 
interface, such as 

telnet

ssh

, or the RS-232 Console port.  This allows you to dynamically and 

seamlessly change the encoding bitrate and format, while the encoder is running.  
 
The first argument is always /dev/qvencode1, The second argument is "get_videobitrate" or 
"set_videobitrate BITRATE"

, or “set_outputformat FORMAT”. Here BITRATE is the desired new 

bitrate, in bits per second. The maximum bitrate is 30000000 (30 Mbps, UDP only). FORMAT is 
one of: 

1080i59.94|1080i50|720p59.94|720p50|480i59.94|576i50|240p30

. The 

set_videobitrate command always returns VIDEO_BITRATE=xxxxxxx where xxxxxx is the current 
bitrate. The set_outputformat command always returns OUTPUT_FORMAT=YYYxZZZ, where 
YYYxZZZ is the new video format. Here are some examples:  
 
[QVPRO.qvidium.com]$ /qvidium/qvctrl /dev/qvencode1 "get_videobitrate"  
VIDEO_BITRATE=4000000  
[QVPRO.qvidium.com]$ /qvidium/qvctrl /dev/qvencode1 "set_videobitrate 2000000"  
VIDEO_BITRATE=2000000  
[QVPRO.qvidium.com]$ /qvidium/qvctrl /dev/qvencode1 "set_videobitrate 8000000"  
VIDEO_BITRATE=8000000 
 
[QVPRO.qvidium.com]$ /qvidium/qvctrl /dev/qvencode1 'set_outputformat 480i59.94' 
OUTPUT_FORMAT=720x480i30 
[QVPRO.qvidium.com]$ /qvidium/qvctrl /dev/qvencode1 'set_outputformat 1080i59.94' 
OUTPUT_FORMAT=1920x1080i30 
[QVPRO.qvidium.com]$ /qvidium/qvctrl /dev/qvencode1 'set_outputformat 240p30' 
OUTPUT_FORMAT=352x240p30 
 
 

Summary of Contents for QVDEC








































































Reviews: