Quonset Microwave QM1014, User Manual

Page: 32 / 81

QM1014 LO Synthesizer Distribution Unit User Manual
Table 4.2: FREQuency Subsystem Commands Summary
Command Page Description
FREQuency:LO1 23 Sets or Returns the frequency of the internal LO1.
FREQuency:LO2 24 Sets or Returns the frequency of the internal LO2.
FREQuency:LOCK 25 Returns the lock status of the internal LOs.
FREQuency:TUNE 26 Sets or Returns the desired tuning frequency in GHz.
FREQuency:TUNErACTual 27 Returns the actual tuning frequency of the device in
GHz. This query is useful when internal frequency
rounding occurs in integer mode.
FREQuency:LO1:LOCK 28 Returns the lock status of the internal LO1s for both
channels.
FREQuency:LO2:LOCK 29 Returns the lock status of the internal LO2 for the sys-
tem.
FREQuency:REFerence:EXTernal 30 Sets or Returns whether the internal or external sup-
plied reference oscillator is used.
1.3 POWEr Subsystem
Table 4.3: POWEr Subsystem Commands Summary
Command Page Description
POWEr:RF 31 Turns on or off the RF output of the device.
1.4 STATus Subsystem
Table 4.4: STATus Subsystem Commands Summary
Command Page Description
STATus:OPERation 32 Returns the contents of the status event register.
STATus:OPERation:CONDition 33 Returns the contents of the condition register.
STATus:OPERation:ENABle 34 Sets the enable bit mask for the status event register.
STATus:PRESet 35 Presets the STATus:QUEStionable:ENABle register.
STATus:QUEStionable 36 Returns the contents of the questionable register.
STATus:QUEStionable:CONDition 37 Returns the contents of the questionable condition reg-
ister.
STATus:QUEStionable:ENABle 38 Sets the enable bit mask for the questionable register.
Quonset Microwave Revision 1.2.1 21