Quincy Compressor QED-300 Instruction Book Download Page 20

Page: 20 / 66

3.2

Control panel

Detailed description

Control panel

Reference

Designation

Function

Display

Shows icons and operating conditions.

Automatic operation symbol

LED, Automatic operation

Indicates that the regulator is automatically controlling the
dryer. The dryer is stopped and restarted depending on the
air consumption and the data programmed in the regulator.

Warning symbol

LED, Warning

Is lit if a warning condition exists.

Voltage symbol

LED, Voltage on

Indicates that the voltage is switched on.

Service symbol

LED, Service

Is lit when service is needed.

Start button

This button starts the dryer. Automatic operation LED (3)
lights up. The Infologic² is operative.

Stop button

This button is used to stop the dryer. Automatic operation
LED (3) goes out.

Scroll buttons

Use these buttons to scroll through the menu .

Enter button

Use this button to confirm the last action

Escape button

Use this button to go to previous screen or to end the
current action.

3.3

Icons and symbols used on the display

Function

Icon

Description

Dryer status

When the dryer is stopped, the icon is standing still.
When the dryer is operating, the icon is rotating.

Instruction book

2920 7103 90

Summary of Contents for QED-300



































































Search results

Summary of Contents for QED-300

Reviews:

Related manuals for QED-300

Brands by name

Popular brands

Quincy Compressor QED-300, Instruction Book

Search results

Summary of Contents for QED-300

Reviews:

Related manuals for QED-300

Brands by name

Popular brands