Cleaning
At least once a week, drain the water tank completely and refill it with fresh water. Doing this
will greatly reduce mineral deposits and help to extend the life of the Honeycomb Cooling
media & humidifier filter.
Troubleshooting guide
Problem
Problem cause
Replace filter reference time
When theHEPA filtertotal work time reach to 1000hours, the machine will notice to change
the HEPA filter. The UV/HEPA indicator will flash.
End of season storage
If the QE2RVKS will not be used for a long time:
•Make sure all parts are dry by running the Fan Only mode for about 1 to 2 hours before
storing (time depends on ambient humidity conditions).
•Switch OFF the QE2RVKS and unplug from the power supply.
•Empty/drain all the water from the tank.
•Clean the water tank with a damp cloth to wipe away any dust or mineral deposits.
•Remove the Honeycomb cooling cartridge/Humidity PP filter and Carbon Dust Filter from the
QE2RVKS and rinse under fresh water to remove dust and dirt.
•Pack and store the Honeycomb cooling cartridge/Humidity PP filter and Carbon Dust Filter
after they are clean and dry.
•To protect the unit from dust, moisture and scratches, cover with a clean cloth, tarp or
plastic bag before storing.
•Coil the power cord and store it away from the floor to protect it.
•Store this unit at room temperature in a dry location, away from direct sunlight and/or
very hot, cold, or damp environments.
Solution
No discharge of air
Not Cooling / Unit
is making noise
The power cord is not plugged in.
The motor is jammed or burning.
The blower screw is loose or the
blower is broken.
The machine is not turned on.
The pump is not started up.
Low or no water in the tank,
when COOL is selected.
Refill water tank.
Press the COOL button on the
remote or control panel to start
up the water pump.
Make sure power cord is plugged
in and the switch is on.
Contact Customer Service Center.
Contact Customer Service Center.
Turn the unit ON by pressing the
power button on the control
panel / remote control.
19