Speed+SLEEP: This mode is for comfort during the night. When the SLEEP mode is selected,
the airflow will randomly vary between High, Medium, Low as below.
H+SLEEP: Running at High speed for 30 minutes, then change to mid speed for 30mins, and
then Low speed until the unit is switched off.
M+SLEEP: Running at mid-speed for 30 minutes then change to low speed until the unit is
switched off.
L+SLEEP: Running at low speed until the unit is switched off.
Swing button
：
Vertical air direction -- Press the SWING button and the SWING indicator light is on, the
louvers will begin to move left to right automatically. Press the SWING button again, the
louver will stop moving and the indicator light will turn off.
Horizontal Air direction - You can manually adjust the louvers to change the horizontal
airflow.
Timer button:
Press the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (the unit remains in Standby mode until the
power cord is unplugged from the electrical socket). The TIMER function allows you to
program the unit for up to 8 hours of use.
Uv button:
Press UV/replace button to turn on UV light, Press UV/replace button again to turn off UV
light.
Mode button:
Deactivate.
Humidity setting button
：
Deactivate.
Auto button:
Press Auto button
，
Auto button LED light is on, unit running at Auto mode as below :
PM2.5 in the range of 0~50, runs at low speed
，
PM2.5 >50~100, runs at mid speed
，
PM2.5 >100,
runs at high speed.
UV/ replace:
When the life cycle of HEPA expires
，
UV/replace LED light will flash to remind the user to
replace it. Once HEPA is replaced
，
press UV/replace button for 3 seconds and the unit will
record the expiration date of the new HEPA.
13
