Use & Operation
CONTROL PANEL
Icons on Display Screen
Button Functions
When the machine is connected to the power supply,the unit will detect which cartridge has
been selected.
Before turning on the unit, please select one of the cartridges to start the operation.
When Honeycomb is used, “HC” letter will be displayed on the display screen and COOL icon
will light up along with a beep.
When HEPA is used, “HP” letter will be displayed on the display screen and Purify icon will
light up along with a beep.
When humidify PP filter is used, “HU” letter will be displayed on the display screen and
Humidify icon will light up along with a beep.
Note:
When there are no cartridges installed, the number ‘888’ will be displayed on the
display screen and the power button will not work.
When Honeycomb is used:
Power button:
Press the POWER button to turn the unit on. The cooler will start automatically at ‘Mid’ speed.
After a few seconds, the speed will switch to ‘low’. To turn the unit off, press the button again.
When the ‘Cool’ icon light is on, this means that evaporative cooling is activated. The water
pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is
completely wet.
When ‘Cool’ icon light is flashing, it is a reminder to the user to fill/refill the tank with water.
Speed Button:
Press Speed Button Repeatedly To Change The Speed Between low-high-mid-low. The Indica-
tor Light Will Show The Selected Speed.
9
