Warning:
Do not fill the water tank with dirty water or salt water. This can damage the unit
and Honeycomb media.
Low water alarm
The unit is equipped with a low water sensor. In COOL&humidityMode, when water in the
tank isbelow the minimum level, you will hear 10timesalarm sounds, and the indicator light
will flashcontinuously. The unit will automatically pause evaporative cooling & humidification.
Refill the water tank to deactivate the alarm incool&humidityMode. First switch OFF the unit
andunplug from the electrical socket. Fill the water tank with water above the minimum water
level mark. Plug in and switch it ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling &
humidification),switch the unit OFF and then ON again. The Low Water Alarm will activate
and keep running at Fan mode.
Warning:
Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.
•Use a damp cloth to remove dirt and dust from the surface of the unit. Never use
corrosive elements or chemicals to clean this product.
•When the product is not in use, store the unit in a dry place out of direct sunlight.
•Do not put the product into water or any other liquid. Do not use corrosive or flammable gas
(e.g. bleach or alcohol) to clean any part of the product.
•The appliance is supplied with a Carbon Dust Filter* and 3 cartridges.
•The Carbon Dust Filter* andone of cartridge are located inside the Rear
Grill. See Figure 1 for instructions on how to remove them from the unit for cleaning and
maintenance.
Cleaning & draining the water tank
Cleaning the carbon dust filter/honeycomb cooling cartridge/humidity pp filter cartridge.
Warning:
Before cleaning the unit, switch the unit OFF and disconnect the powercordfromelectrical
socket.
Caution: HEPA cartridge can not be wet and washed.
16
