UV button
Press UV/replace button to turn on UV light, Press UV/replace button again to turn off UV
light.
Mode
When the water in the tank is abovethe minimum level, humidifyled light automaticallyturns
on and the pump starts working. Press the mode button again and the humidify ledlight will
turn off and the pump stops working.
When the water in the tank is belowthe minimum level,humidify light automatically turns off,
and the pump stops working.
Press the mode button againto deactivate.
Auto button:
Press the Auto button to get the unit running in Auto mode as below :
When the water in the tankis abovethe minimum leveland when the detected humidity level
is less than the last humiditysetting,thewater pump works automatically.
When the detected humidity level is more than the last humidity setting, the water pump
stops working automatically.
Press the Auto button again to quit Auto mode.
Humidity setting:
Press the‘Swing’ button for 3 secondsto change the humidity setting. Initially, 55%RH is
displayed on the display screen, and the % indicator light flashes.
Press the MODE button to increase the humidity setting by 5%, Press the TIME button to
reduce the humidity setting by 5%. The humidity can be set in the range of 40%RH~70%.
When HEPA cartridge is used
Power button:
Press the POWER button to turn the unit on. The fan speed will start automatically at Mid
speed. After a few seconds, the speed will switch to low. To turn the unit off, press the button
again.
When ‘Purify” icon light is on, this activates the air purifica-
tion function
Speed button:
Press the SPEED button repeatedly to change the speed between LOW -HIGH-MID-LOW. The
indicator light will show the selected speed.
Press the SPEED button for 3 seconds to select your desired wind type: Speed+NATURAL –
Speed+SLEEP (Variable). The indicator light will show the selected wind type.
Speed+NATURAL: The fan speed alternates between High, Mid, Low, and Off to mimic a
natural breeze.
12
