Always wait until all parts of the appliance have come to a complete
standstill before mounting or removing accessories. Risk of injury
Turn off the power after each use and unplug the unit to prevent
accidental start-up.
Do not blend hard cores and remove any stems or stalks from the
food to be blended before blending. Before grinding meat, remove
any bones and tendons.
Cut solid ingredients such as vegetables or meat into small
pieces before putting them into the stainless steel mixing bowl
Use only the spatula provided to remove the mixture. To do this,
always ensure that the device is switched off and unplugged, and
that all components are completely stopped. The spatula must
not come into contact with the components in motion.
Do not put the stainless steel mixing bowl in the microwave or in
the oven, or on a cooking plate (electric or gas).
Do not put any ingredients in the stainless steel mixing bowl if the
blades are not in place. Ingredients will escape. The water would
come out of the hole in the bottom of the bowl.
Use the appliance only with the supplied power cord. Connect
the power cord to the appliance first, then to a correctly installed
earthed mains socket.
If you use the appliance at high speed (rpm) and without liquid,
e.g. for chopping dry ingredients (e.g. almonds), nuts, etc.), the
appliance should not be operated for more than 40 seconds at a
time. After this, the appliance must cool down for approx. 10
minutes before you can use it again.
If you want to boil water or other ingredients in the stainless steel
mixing bowl, make sure that the amount of filling does not
exceed 1.5 l (= 3rd line mark in from the bottom of the mixing
bowl) and that the speed does not exceed the level 1.
Caution
when preparing frozen ingredients. As sudden
temperature changes can put stress on the blade material, we
recommend waiting a few minutes before starting preparation
after adding frozen ingredients to the stainless steel mixing bowl.
Start the preparation at low speed and increase the speed as
13