Adjust the Gear mesh between the
Main gear and the Clutch Bell on the
Clutch Bell Bearing Block using a
double thick piece of notebook paper in
between the 2 gears and adjust the
Clutch Bell Bearing Block by pushing it
tight against the main gear.
Remember the gear mesh should be
smooth readjust if necessary.
Step 3 – Fan Shroud Installation
Install (1) Fan Shroud using (4) 2.6-6
Self Tap Screws. Install the fan Shroud
at the top of the slots provided in the
frame after the engine is installed lower
the fan Shroud as close to the fan as
possible without interference.
Replacement Part #:
Fan Shroud – QD367
Step 4 – Fan, Clutch, & Engine Mount Installation
Install (1) Plastic Fan onto (1) Fan Hub
using (4) M3-6 Flat Head Phillips
Replacement Part #:
Plastic Fan – QD369
Fan Hub – QD362
