Step 1A – Shim Ball Installation
Install (6) Shim Balls using (6) M2-8
Phillips Screws. Install each Shim ball
as close to the recommended distance
for the center of the servo splice and
the center of the shim balls.
Carburetor
11.75-13mm
Throttle Servo
11.75-13mm
Swashplate
Servos
18-20mm
Rudder Servo
11.75-13mm
Rod Use
Throttle Servo to Carburetor
Linkage ID Letter
A
# of Rods
1
Rod Size
2.3-80
Ball Link 1
Medium
Ball Link 2
Medium
Center to Center
93.2mm
Rod Use
Elevator Servo to Swashplate
Linkage ID Letter
B
# of Rods
1
Rod Size
2.3-35
Ball Link 1
Medium
Ball Link 2
Medium
Center to Center
54mm
Rod Use
Rear Lower Swash. Servo to Swashplate
Linkage ID Letter
C
# of Rods
1
Rod Size
2.3-50
Ball Link 1
Medium
Ball Link 2
Medium
Center to Center
71.45mm
