Install (1) Main Shaft into Main Shaft
Bearing Blocks with reduced portion of
the shaft down.
Replacement Part #:
Main Shaft – QD356
Install (1) Auto-Rotation Clutch/Main
Gear Assembly to the Main Shaft using
(1) M3-16 Cap Head Bolt & (1) M3
Locknut.
Install (1) Main Shaft collar over the top
of the Main Shaft and secure using (4)
M3-3 Set Screws. Note: Be sure the
ridge on the collar goes down towards
the upper bearing. Also after the collar
is tightened to the shaft there should be
No up or down movement in the Main
Shaft.
Replacement Part #:
Main Shaft Collar – QD357