Install both (2) Front Tail Transmission
Bearing Block so the protruding side of
the bearings face the counter gear
assembly. (Assembled above).
Replacement Part #:
Front Tail Trans Bearing Block –
QD353
Install (1) Tail Pulley Gear to the
reduced portion of the Counter Gear
Shaft using (1) M3-3 Set Screw,
Making sure the set screw hits the flat
on the counter gear shaft.
Note:
The side of the pulley gear with
the holes should face up as per picture
in the next step.
Tail Pulley Gear – QT356
Install the above Transmission
Assembly to the Left upper frame using
(4) M3-8 Cap Head Bolts
