Step 2 – Tail Rotor Assembly
Slide the (1) Tail Pitch Slider over the
Tail output Shaft
Replacement Part #:
Tail Pitch Slider – QT350
Locate Tail pitch change Lever and
attach (1) M3-4 Pivot Ball Stud
There are 2 Versions of the Tail Pitch
lever & Mount M2 & M3.It is possible
that you could receive both version and
the required hardware to install it.
Replacement Part #:
Tail Pitch Change Lever – QT351
Install Tail Pitch Change Lever
Capturing The stud Ball on the Tail
Pitch Slider in the bushing on the Tail
Pitch Change Lever & Bolt the Tail
Pitch Change Lever to the Tail Pitch
Change Lever Mount using
M3 Version
(1) M3 Spacer, (1) M3-18 Cap Head
Bolt, & M3 Locknut
M2 Version
(1) M2 Shim, (1) M2-12 Cap Head Bolt,
& M2 Nut
