Quicksilver SmartCraft Systems, Reference Manual

Page: 37 / 110

2.0 Marine Diagnostics
35 Reference Manual
1- Mercury Marine
NOTE: When starting the engine, the DDT may “lock up” due to low
battery voltage. If this happens, remove the cartridge and reinsert it.
This will reset the DDT and it will power up again.
You can use the Data Monitor function to display engine operating
parameters available from the ECM. The screen will display “live” data
such as engine speed, throttle position, battery volts, air temperature,
map psi, coolant temperature, TPI % and more. You can also record
and/or print the data for detailed examination or for your records.
Select Function:
1-DATA MONITOR
2-FAULT STATUS
3-SYSTEM INFO
↓
The Data Monitor display items may vary depending on the specific
engine type being serviced. Many sensors or parameters may be
common between two stroke or four stroke engines. The first section
of the Data Monitor screens will be examples of a two stroke DFI
engine. The next section will be examples of a four stroke EFI engine.
Press the 1 key. Start the engine. The DATA MONITOR screen will
appear.
Line Lock
Available
Record
Available
PRINT
Press F2, 1 Available