1.0 Introduction
25
Reference Manual
TRANSFERRING DATA TO A PC
5
To enter the DDT File Manager menu, Press F2 and then 9 and
select choice 5 – Print. Use the
↑
and
↓
keys to scroll and select
the file. Press ENTER. Data should now transfer to the PC
screen.
NOTE: If the data transfer to the PC screen does not look correct, this
indicates that the baud rate is not correct. The cartridge default setting
is 2400. Please make sure that the tool baud rate matches what you
are setting up the PC software to do.
6
Once all the data has been received, select Transfers – Stop,
from the Windows terminal menu bar. The data will be saved to the
hard drive as OG123456.txt.
7
Clear the terminal screen for the next file. Select Edit – Clear
Buffer. Steps 4, 5, 6, and 7 can be repeated if you need to transfer
more files.
8
Once the file has been saved on the PC, it can be manipulated
in any desired manner. For example, you can;
•
Print to the PC’s printer.
•
Edit the file.
•
Include the file in a report. Most PC word processors and spread
sheets can import a single text file into a document.
(Refer to your word processor manual for instructions on printing,
editing and importing files.)
Summary of Contents for SmartCraft Systems
