Quicksilver 675WE, Owner'S Manual

Page: 53 / 91

41
Quicksilver 675WE — System & Component Overview and Operation
21. Cockpit Table
Your boat will come with either a plastic or an optional teak table. To install the table, first remove the
plastic cover located in the table base plate. Next, push and lock the table leg into the base plate.
Finally, place the table onto the table leg. When not in use, the table can be placed in a canvas bag
(teak table only) and stored in the forward berth, while the table leg is stored in the port cockpit seat.
Cockpit Table
Plastic table
Teak table
Table leg
Table base
22. Cockpit Sun Lounge (optional)
Your boat may be equipped with an optional cockpit sun lounge. To convert, first remove the aft
bench seat cushion. Next, rotate the aft seat base forward 180 degrees. Finally, insert the motorwell
filler board and install the sun lounge filler cushion in place. When not in use the motorwell filler
board and sun lounge filler cushion can be stored in the forward storage area.
Cockpit Sun Lounge
Aft bench seat cushion
Aft bench seat base
Filler board
Sun lounge filler cushion
23. Cockpit Sunshade (optional)
If installed, an optional cockpit sunshade is available to provide protection from the sun. The cockpit
sunshade consists of a rail in the hardtop and a canvas.
Operation
At the upper corner of the hardtop (port and starboard), there is a plate with a pin that holds the